Welcome to Knowledge Base!

KB at your finger tips

This is one stop global knowledge base where you can learn about all the products, solutions and support features.

Categories
All
Web-Angular
Angular - Building and serving Angular apps

Building and serving Angular apps link

This page discusses build-specific configuration options for Angular projects.

Configuring application environments link

You can define different named build configurations for your project, such as staging and production , with different defaults.

Each named configuration can have defaults for any of the options that apply to the various builder targets, such as build , serve , and test . The Angular CLI build , serve , and test commands can then replace files with appropriate versions for your intended target environment.

Configure environment-specific defaults link

A project's src/environments/ folder contains the base configuration file, environment.ts , which provides a default environment. You can add override defaults for additional environments, such as production and staging, in target-specific configuration files.

For example:

myProject/src/environments
environment.ts
environment.prod.ts
environment.staging.ts

The base file environment.ts , contains the default environment settings. For example:

      
      export const environment = {
  production: false
};
    

The build command uses this as the build target when no environment is specified. You can add further variables, either as additional properties on the environment object, or as separate objects. For example, the following adds a default for a variable to the default environment:

      
      export const environment = {
  production: false,
  apiUrl: 'http://my-api-url'
};
    

You can add target-specific configuration files, such as environment.prod.ts . The following content sets default values for the production build target:

      
      export const environment = {
  production: true,
  apiUrl: 'http://my-prod-url'
};
    

Using environment-specific variables in your app link

The following application structure configures build targets for production and staging environments:

src
app
app.component.html
app.component.ts
environments
environment.ts
environment.prod.ts
environment.staging.ts

To use the environment configurations you have defined, your components must import the original environments file:

      
      import { environment } from './../environments/environment';
    

This ensures that the build and serve commands can find the configurations for specific build targets.

The following code in the component file ( app.component.ts ) uses an environment variable defined in the configuration files.

      
      import { Component } from '@angular/core';
import { environment } from './../environments/environment';

@Component({
  selector: 'app-root',
  templateUrl: './app.component.html',
  styleUrls: ['./app.component.css']
})
export class AppComponent {
  constructor() {
    console.log(environment.production); // Logs false for default environment
  }
  title = 'app works!';
}
    

Configure target-specific file replacements link

The main CLI configuration file, angular.json , contains a fileReplacements section in the configuration for each build target, which lets you replace any file in the TypeScript program with a target-specific version of that file. This is useful for including target-specific code or variables in a build that targets a specific environment, such as production or staging.

By default no files are replaced. You can add file replacements for specific build targets. For example:

      
      "configurations": {
  "production": {
    "fileReplacements": [
      {
        "replace": "src/environments/environment.ts",
        "with": "src/environments/environment.prod.ts"
      }
    ],
    
    

This means that when you build your production configuration with ng build --configuration production , the src/environments/environment.ts file is replaced with the target-specific version of the file, src/environments/environment.prod.ts .

You can add additional configurations as required. To add a staging environment, create a copy of src/environments/environment.ts called src/environments/environment.staging.ts , then add a staging configuration to angular.json :

      
      "configurations": {
  "production": {  },
  "staging": {
    "fileReplacements": [
      {
        "replace": "src/environments/environment.ts",
        "with": "src/environments/environment.staging.ts"
      }
    ]
  }
}
    

You can add more configuration options to this target environment as well. Any option that your build supports can be overridden in a build target configuration.

To build using the staging configuration, run the following command:

      
      ng build --configuration=staging
    

You can also configure the serve command to use the targeted build configuration if you add it to the "serve:configurations" section of angular.json :

      
      "serve": {
  "builder": "@angular-devkit/build-angular:dev-server",
  "options": {
    "browserTarget": "your-project-name:build"
  },
  "configurations": {
    "production": {
      "browserTarget": "your-project-name:build:production"
    },
    "staging": {
      "browserTarget": "your-project-name:build:staging"
    }
  }
},
    

Configuring size budgets link

As applications grow in functionality, they also grow in size. The CLI lets you set size thresholds in your configuration to ensure that parts of your application stay within size boundaries that you define.

Define your size boundaries in the CLI configuration file, angular.json , in a budgets section for each configured environment.

      
      {
  
  "configurations": {
    "production": {
      
      "budgets": []
    }
  }
}
    

You can specify size budgets for the entire app, and for particular parts. Each budget entry configures a budget of a given type. Specify size values in the following formats:

Size value Details
123 or 123b Size in bytes.
123kb Size in kilobytes.
123mb Size in megabytes.
12% Percentage of size relative to baseline. (Not valid for baseline values.)

When you configure a budget, the build system warns or reports an error when a given part of the application reaches or exceeds a boundary size that you set.

Each budget entry is a JSON object with the following properties:

Property Value
type The type of budget. One of:
Value Details
bundle The size of a specific bundle.
initial The size of JavaScript needed for bootstrapping the application. Defaults to warning at 500kb and erroring at 1mb.
allScript The size of all scripts.
all The size of the entire application.
anyComponentStyle This size of any one component stylesheet. Defaults to warning at 2kb and erroring at 4kb.
anyScript The size of any one script.
any The size of any file.
name The name of the bundle (for type=bundle ).
baseline The baseline size for comparison.
maximumWarning The maximum threshold for warning relative to the baseline.
maximumError The maximum threshold for error relative to the baseline.
minimumWarning The minimum threshold for warning relative to the baseline.
minimumError The minimum threshold for error relative to the baseline.
warning The threshold for warning relative to the baseline (min & max).
error The threshold for error relative to the baseline (min & max).

Configuring CommonJS dependencies link

It is recommended that you avoid depending on CommonJS modules in your Angular applications. Depending on CommonJS modules can prevent bundlers and minifiers from optimizing your application, which results in larger bundle sizes. Instead, it is recommended that you use ECMAScript modules in your entire application. For more information, see How CommonJS is making your bundles larger.

The Angular CLI outputs warnings if it detects that your browser application depends on CommonJS modules. To disable these warnings, add the CommonJS module name to allowedCommonJsDependencies option in the build options located in angular.json file.

      
      "build": {
  "builder": "@angular-devkit/build-angular:browser",
  "options": {
     "allowedCommonJsDependencies": [
        "lodash"
     ]
     
   }
   
},
    

Configuring browser compatibility link

The Angular CLI uses Browserslist to ensure compatibility with different browser versions. Autoprefixer is used for CSS vendor prefixing and @babel/preset-env for JavaScript syntax transformations.

Internally, the Angular CLI uses the below browserslist configuration which matches the browsers that are supported by Angular.

      
      last 1 Chrome version
last 1 Firefox version
last 2 Edge major versions
last 2 Safari major versions
last 2 iOS major versions
Firefox ESR
    

To override the internal configuration, add a new file named .browserslistrc , to the project directory, that specifies the browsers you want to support:

      
      last 1 Chrome version
last 1 Firefox version
    

See the browserslist repository for more examples of how to target specific browsers and versions.

Use browsersl.ist to display compatible browsers for a browserslist query.

Proxying to a backend server link

Use the proxying support in the webpack development server to divert certain URLs to a backend server, by passing a file to the --proxy-config build option. For example, to divert all calls for http://localhost:4200/api to a server running on http://localhost:3000/api , take the following steps.

  1. Create a file proxy.conf.json in your project's src/ folder.

  2. Add the following content to the new proxy file:

          
          {
      "/api": {
        "target": "http://localhost:3000",
        "secure": false
      }
    }
        
  3. In the CLI configuration file, angular.json , add the proxyConfig option to the serve target:

          
          
    "architect": {
      "serve": {
        "builder": "@angular-devkit/build-angular:dev-server",
        "options": {
          "browserTarget": "your-application-name:build",
          "proxyConfig": "src/proxy.conf.json"
        },
    
        
  4. To run the development server with this proxy configuration, call ng serve .

Edit the proxy configuration file to add configuration options; following are some examples. For a description of all options, see webpack DevServer documentation.

NOTE :
If you edit the proxy configuration file, you must relaunch the ng serve process to make your changes effective.

Rewrite the URL path link

The pathRewrite proxy configuration option lets you rewrite the URL path at run time. For example, specify the following pathRewrite value to the proxy configuration to remove "api" from the end of a path.

      
      {
  "/api": {
    "target": "http://localhost:3000",
    "secure": false,
    "pathRewrite": {
      "^/api": ""
    }
  }
}
    

If you need to access a backend that is not on localhost , set the changeOrigin option as well. For example:

      
      {
  "/api": {
    "target": "http://npmjs.org",
    "secure": false,
    "pathRewrite": {
      "^/api": ""
    },
    "changeOrigin": true
  }
}
    

To help determine whether your proxy is working as intended, set the logLevel option. For example:

      
      {
  "/api": {
    "target": "http://localhost:3000",
    "secure": false,
    "pathRewrite": {
      "^/api": ""
    },
    "logLevel": "debug"
  }
}
    

Proxy log levels are info (the default), debug , warn , error , and silent .

Proxy multiple entries link

You can proxy multiple entries to the same target by defining the configuration in JavaScript.

Set the proxy configuration file to proxy.conf.js (instead of proxy.conf.json ), and specify configuration files as in the following example.

      
      const PROXY_CONFIG = [
    {
        context: [
            "/my",
            "/many",
            "/endpoints",
            "/i",
            "/need",
            "/to",
            "/proxy"
        ],
        target: "http://localhost:3000",
        secure: false
    }
]

module.exports = PROXY_CONFIG;
    

In the CLI configuration file, angular.json , point to the JavaScript proxy configuration file:

      
      
"architect": {
  "serve": {
    "builder": "@angular-devkit/build-angular:dev-server",
    "options": {
      "browserTarget": "your-application-name:build",
      "proxyConfig": "src/proxy.conf.js"
    },

    

Bypass the proxy link

If you need to optionally bypass the proxy, or dynamically change the request before it's sent, add the bypass option, as shown in this JavaScript example.

      
      const PROXY_CONFIG = {
    "/api/proxy": {
        "target": "http://localhost:3000",
        "secure": false,
        "bypass": function (req, res, proxyOptions) {
            if (req.headers.accept.indexOf("html") !== -1) {
                console.log("Skipping proxy for browser request.");
                return "/index.html";
            }
            req.headers["X-Custom-Header"] = "yes";
        }
    }
}

module.exports = PROXY_CONFIG;
    

Using corporate proxy link

If you work behind a corporate proxy, the backend cannot directly proxy calls to any URL outside your local network. In this case, you can configure the backend proxy to redirect calls through your corporate proxy using an agent:

      
      npm install --save-dev https-proxy-agent
    

When you define an environment variable http_proxy or HTTP_PROXY , an agent is automatically added to pass calls through your corporate proxy when running npm start .

Use the following content in the JavaScript configuration file.

      
      var HttpsProxyAgent = require('https-proxy-agent');
var proxyConfig = [{
  context: '/api',
  target: 'http://your-remote-server.com:3000',
  secure: false
}];

function setupForCorporateProxy(proxyConfig) {
  var proxyServer = process.env.http_proxy || process.env.HTTP_PROXY;
  if (proxyServer) {
    var agent = new HttpsProxyAgent(proxyServer);
    console.log('Using corporate proxy server: ' + proxyServer);
    proxyConfig.forEach(function(entry) {
      entry.agent = agent;
    });
  }
  return proxyConfig;
}

module.exports = setupForCorporateProxy(proxyConfig);
    
Last reviewed on Mon Oct 24 2022
Angular - Built-in directives

Built-in directives link

Directives are classes that add additional behavior to elements in your Angular applications. Use Angular's built-in directives to manage forms, lists, styles, and what users see.

See the live example / download example for a working example containing the code snippets in this guide.

The different types of Angular directives are as follows:

Directive Types Details
Components Used with a template. This type of directive is the most common directive type.
Attribute directives Change the appearance or behavior of an element, component, or another directive.
Structural directives Change the DOM layout by adding and removing DOM elements.

This guide covers built-in attribute directives and structural directives.

Built-in attribute directives link

Attribute directives listen to and modify the behavior of other HTML elements, attributes, properties, and components.

Many NgModules such as the RouterModule and the FormsModule define their own attribute directives. The most common attribute directives are as follows:

Common directives Details
NgClass Adds and removes a set of CSS classes.
NgStyle Adds and removes a set of HTML styles.
NgModel Adds two-way data binding to an HTML form element.

Built-in directives use only public APIs. They do not have special access to any private APIs that other directives can't access.

Adding and removing classes with NgClass link

Add or remove multiple CSS classes simultaneously with ngClass .

To add or remove a single class, use class binding rather than NgClass .

Using NgClass with an expression link

On the element you'd like to style, add [ngClass] and set it equal to an expression. In this case, isSpecial is a boolean set to true in app.component.ts . Because isSpecial is true, ngClass applies the class of special to the <div> .

src/app/app.component.html
      
      <!-- toggle the "special" class on/off with a property -->
<div [ngClass]="isSpecial ? 'special' : ''">This div is special</div>
    

Using NgClass with a method link

  1. To use NgClass with a method, add the method to the component class. In the following example, setCurrentClasses() sets the property currentClasses with an object that adds or removes three classes based on the true or false state of three other component properties.

    Each key of the object is a CSS class name. If a key is true , ngClass adds the class. If a key is false , ngClass removes the class.

    src/app/app.component.ts
          
          currentClasses: Record<string, boolean> = {};
    /* . . . */
    setCurrentClasses() {
      // CSS classes: added/removed per current state of component properties
      this.currentClasses =  {
        saveable: this.canSave,
        modified: !this.isUnchanged,
        special:  this.isSpecial
      };
    }
        
  2. In the template, add the ngClass property binding to currentClasses to set the element's classes:

    src/app/app.component.html
          
          <div [ngClass]="currentClasses">This div is initially saveable, unchanged, and special.</div>
        

For this use case, Angular applies the classes on initialization and in case of changes. The full example calls setCurrentClasses() initially with ngOnInit() and when the dependent properties change through a button click. These steps are not necessary to implement ngClass . For more information, see the live example / download example app.component.ts and app.component.html .

Setting inline styles with NgStyle link

Use NgStyle to set multiple inline styles simultaneously, based on the state of the component.

  1. To use NgStyle , add a method to the component class.

    In the following example, setCurrentStyles() sets the property currentStyles with an object that defines three styles, based on the state of three other component properties.

    src/app/app.component.ts
          
          currentStyles: Record<string, string> = {};
    /* . . . */
    setCurrentStyles() {
      // CSS styles: set per current state of component properties
      this.currentStyles = {
        'font-style':  this.canSave      ? 'italic' : 'normal',
        'font-weight': !this.isUnchanged ? 'bold'   : 'normal',
        'font-size':   this.isSpecial    ? '24px'   : '12px'
      };
    }
        
  2. To set the element's styles, add an ngStyle property binding to currentStyles .

    src/app/app.component.html
          
          <div [ngStyle]="currentStyles">
      This div is initially italic, normal weight, and extra large (24px).
    </div>
        

For this use case, Angular applies the styles upon initialization and in case of changes. To do this, the full example calls setCurrentStyles() initially with ngOnInit() and when the dependent properties change through a button click. However, these steps are not necessary to implement ngStyle on its own. See the live example / download example app.component.ts and app.component.html for this optional implementation.

Displaying and updating properties with ngModel link

Use the NgModel directive to display a data property and update that property when the user makes changes.

  1. Import FormsModule and add it to the NgModule's imports list.

    src/app/app.module.ts (FormsModule import)
          
          import { FormsModule } from '@angular/forms'; // <--- JavaScript import from Angular
    /* . . . */
    @NgModule({
      /* . . . */
    
      imports: [
        BrowserModule,
        FormsModule // <--- import into the NgModule
      ],
      /* . . . */
    })
    export class AppModule { }
        
  2. Add an [(ngModel)] binding on an HTML <form> element and set it equal to the property, here name .

    src/app/app.component.html (NgModel example)
          
          <label for="example-ngModel">[(ngModel)]:</label>
    <input [(ngModel)]="currentItem.name" id="example-ngModel">
        

    This [(ngModel)] syntax can only set a data-bound property.

To customize your configuration, write the expanded form, which separates the property and event binding. Use property binding to set the property and event binding to respond to changes. The following example changes the <input> value to uppercase:

src/app/app.component.html
      
      <input [ngModel]="currentItem.name" (ngModelChange)="setUppercaseName($event)" id="example-uppercase">
    

Here are all variations in action, including the uppercase version:

NgModel and value accessors link

The NgModel directive works for an element supported by a ControlValueAccessor. Angular provides value accessors for all of the basic HTML form elements. For more information, see Forms.

To apply [(ngModel)] to a non-form built-in element or a third-party custom component, you have to write a value accessor. For more information, see the API documentation on DefaultValueAccessor.

When you write an Angular component, you don't need a value accessor or NgModel if you name the value and event properties according to Angular's two-way binding syntax.

Built-in structural directives link

Structural directives are responsible for HTML layout. They shape or reshape the DOM's structure, typically by adding, removing, and manipulating the host elements to which they are attached.

This section introduces the most common built-in structural directives:

Common built-in structural directives Details
NgIf Conditionally creates or disposes of subviews from the template.
NgFor Repeat a node for each item in a list.
NgSwitch A set of directives that switch among alternative views.

For more information, see Structural Directives.

Adding or removing an element with NgIf link

Add or remove an element by applying an NgIf directive to a host element.

When NgIf is false , Angular removes an element and its descendants from the DOM. Angular then disposes of their components, which frees up memory and resources.

To add or remove an element, bind *ngIf to a condition expression such as isActive in the following example.

src/app/app.component.html
      
      <app-item-detail *ngIf="isActive" [item]="item"></app-item-detail>
    

When the isActive expression returns a truthy value, NgIf adds the ItemDetailComponent to the DOM. When the expression is falsy, NgIf removes the ItemDetailComponent from the DOM and disposes of the component and all of its subcomponents.

For more information on NgIf and NgIfElse , see the NgIf API documentation.

Guarding against null link

By default, NgIf prevents display of an element bound to a null value.

To use NgIf to guard a <div> , add *ngIf="yourProperty" to the <div> . In the following example, the currentCustomer name appears because there is a currentCustomer .

src/app/app.component.html
      
      <div *ngIf="currentCustomer">Hello, {{currentCustomer.name}}</div>
    

However, if the property is null , Angular does not display the <div> . In this example, Angular does not display the nullCustomer because it is null .

src/app/app.component.html
      
      <div *ngIf="nullCustomer">Hello, <span>{{nullCustomer}}</span></div>
    

Listing items with NgFor link

Use the NgFor directive to present a list of items.

  1. Define a block of HTML that determines how Angular renders a single item.
  2. To list your items, assign the shorthand let item of items to *ngFor .
src/app/app.component.html
      
      <div *ngFor="let item of items">{{item.name}}</div>
    

The string "let item of items" instructs Angular to do the following:

  • Store each item in the items array in the local item looping variable
  • Make each item available to the templated HTML for each iteration
  • Translate "let item of items" into an <ng-template> around the host element
  • Repeat the <ng-template> for each item in the list

For more information see the Structural directive shorthand section of Structural directives.

Repeating a component view link

To repeat a component element, apply *ngFor to the selector. In the following example, the selector is <app-item-detail> .

src/app/app.component.html
      
      <app-item-detail *ngFor="let item of items" [item]="item"></app-item-detail>
    

Reference a template input variable, such as item , in the following locations:

  • Within the ngFor host element
  • Within the host element descendants to access the item's properties

The following example references item first in an interpolation and then passes in a binding to the item property of the <app-item-detail> component.

src/app/app.component.html
      
      <div *ngFor="let item of items">{{item.name}}</div>
<!-- . . . -->
<app-item-detail *ngFor="let item of items" [item]="item"></app-item-detail>
    

For more information about template input variables, see Structural directive shorthand.

Getting the index of *ngFor link

Get the index of *ngFor in a template input variable and use it in the template.

In the *ngFor , add a semicolon and let i=index to the shorthand. The following example gets the index in a variable named i and displays it with the item name.

src/app/app.component.html
      
      <div *ngFor="let item of items; let i=index">{{i + 1}} - {{item.name}}</div>
    

The index property of the NgFor directive context returns the zero-based index of the item in each iteration.

Angular translates this instruction into an <ng-template> around the host element, then uses this template repeatedly to create a new set of elements and bindings for each item in the list. For more information about shorthand, see the Structural Directives guide.

Repeating elements when a condition is true link

To repeat a block of HTML when a particular condition is true, put the *ngIf on a container element that wraps an *ngFor element.

For more information see one structural directive per element.

Tracking items with *ngFor trackBy link

Reduce the number of calls your application makes to the server by tracking changes to an item list. With the *ngFor trackBy property, Angular can change and re-render only those items that have changed, rather than reloading the entire list of items.

  1. Add a method to the component that returns the value NgFor should track. In this example, the value to track is the item's id . If the browser has already rendered id , Angular keeps track of it and doesn't re-query the server for the same id .

    src/app/app.component.ts
          
          trackByItems(index: number, item: Item): number { return item.id; }
        
  2. In the shorthand expression, set trackBy to the trackByItems() method.

    src/app/app.component.html
          
          <div *ngFor="let item of items; trackBy: trackByItems">
      ({{item.id}}) {{item.name}}
    </div>
        

Change ids creates new items with new item.id s. In the following illustration of the trackBy effect, Reset items creates new items with the same item.id s.

  • With no trackBy , both buttons trigger complete DOM element replacement.
  • With trackBy , only changing the id triggers element replacement.

Hosting a directive without a DOM element link

The Angular <ng-container> is a grouping element that doesn't interfere with styles or layout because Angular doesn't put it in the DOM.

Use <ng-container> when there's no single element to host the directive.

Here's a conditional paragraph using <ng-container> .

src/app/app.component.html (ngif-ngcontainer)
      
      <p>
  I turned the corner
  <ng-container *ngIf="hero">
    and saw {{hero.name}}. I waved
  </ng-container>
  and continued on my way.
</p>
    
  1. Import the ngModel directive from FormsModule .

  2. Add FormsModule to the imports section of the relevant Angular module.

  3. To conditionally exclude an <option> , wrap the <option> in an <ng-container> .

    src/app/app.component.html (select-ngcontainer)
          
          <div>
      Pick your favorite hero
      (<label><input type="checkbox" checked (change)="showSad = !showSad">show sad</label>)
    </div>
    <select [(ngModel)]="hero">
      <ng-container *ngFor="let h of heroes">
        <ng-container *ngIf="showSad || h.emotion !== 'sad'">
          <option [ngValue]="h">{{h.name}} ({{h.emotion}})</option>
        </ng-container>
      </ng-container>
    </select>
        

Switching cases with NgSwitch link

Like the JavaScript switch statement, NgSwitch displays one element from among several possible elements, based on a switch condition. Angular puts only the selected element into the DOM.

NgSwitch is a set of three directives:

NgSwitch directives Details
NgSwitch An attribute directive that changes the behavior of its companion directives.
NgSwitchCase Structural directive that adds its element to the DOM when its bound value equals the switch value and removes its bound value when it doesn't equal the switch value.
NgSwitchDefault Structural directive that adds its element to the DOM when there is no selected NgSwitchCase .
  1. On an element, such as a <div> , add [ngSwitch] bound to an expression that returns the switch value, such as feature . Though the feature value in this example is a string, the switch value can be of any type.

  2. Bind to *ngSwitchCase and *ngSwitchDefault on the elements for the cases.

    src/app/app.component.html
          
          <div [ngSwitch]="currentItem.feature">
      <app-stout-item    *ngSwitchCase="'stout'"    [item]="currentItem"></app-stout-item>
      <app-device-item   *ngSwitchCase="'slim'"     [item]="currentItem"></app-device-item>
      <app-lost-item     *ngSwitchCase="'vintage'"  [item]="currentItem"></app-lost-item>
      <app-best-item     *ngSwitchCase="'bright'"   [item]="currentItem"></app-best-item>
    <!-- . . . -->
      <app-unknown-item  *ngSwitchDefault           [item]="currentItem"></app-unknown-item>
    </div>
        
  3. In the parent component, define currentItem , to use it in the [ngSwitch] expression.

    src/app/app.component.ts
          
          currentItem!: Item;
        
  4. In each child component, add an item input property which is bound to the currentItem of the parent component. The following two snippets show the parent component and one of the child components. The other child components are identical to StoutItemComponent .

    In each child component, here StoutItemComponent
          
          export class StoutItemComponent {
      @Input() item!: Item;
    }
        

Switch directives also work with built-in HTML elements and web components. For example, you could replace the <app-best-item> switch case with a <div> as follows.

src/app/app.component.html
      
      <div *ngSwitchCase="'bright'"> Are you as bright as {{currentItem.name}}?</div>
    

What's next link

For information on how to build your own custom directives, see Attribute Directives and Structural Directives.

Last reviewed on Mon Feb 28 2022
Read article
Angular - Skipping component subtrees

Skipping component subtrees link

JavaScript, by default, uses mutable data structures that you can reference from multiple different components. Angular runs change detection over your entire component tree to make sure that the most up-to-date state of your data structures is reflected in the DOM.

Change detection is sufficiently fast for most applications. However, when an application has an especially large component tree, running change detection across the whole application can cause performance issues. You can address this by configuring change detection to only run on a subset of the component tree.

If you are confident that a part of the application is not affected by a state change, you can use OnPush to skip change detection in an entire component subtree.

Using OnPush link

OnPush change detection instructs Angular to run change detection for a component subtree only when:

  • The root component of the subtree receives new inputs as the result of a template binding. Angular compares the current and past value of the input with ==
  • Angular handles an event (for example using event binding, output binding, or @HostListener ) in the subtree's root component or any of its children whether they are using OnPush change detection or not.

You can set the change detection strategy of a component to OnPush in the @Component decorator:

      
      import { ChangeDetectionStrategy, Component } from '@angular/core';
@Component({
  changeDetection: ChangeDetectionStrategy.OnPush,
})
export class MyComponent {}
    

Common change detection scenarios link

This section examines several common change detection scenarios to illustrate Angular's behavior.

An event is handled by a component with default change detection link

If Angular handles an event within a component without OnPush strategy, the framework executes change detection on the entire component tree. Angular will skip descendant component subtrees with roots using OnPush , which have not received new inputs.

As an example, if we set the change detection strategy of MainComponent to OnPush and the user interacts with a component outside the subtree with root MainComponent , Angular will check all the green components from the diagram below ( AppComponent , HeaderComponent , SearchComponent , ButtonComponent ) unless MainComponent receives new inputs:

An event is handled by a component with OnPush link

If Angular handles an event within a component with OnPush strategy, the framework will execute change detection within the entire component tree. Angular will ignore component subtrees with roots using OnPush, which have not received new inputs and are outside the component which handled the event.

As an example, if Angular handles an event within MainComponent , the framework will run change detection in the entire component tree. Angular will ignore the subtree with root LoginComponent because it has OnPush and the event happened outside of its scope.

An event is handled by a descendant of a component with OnPush link

If Angular handles an event in a component with OnPush, the framework will execute change detection in the entire component tree, including the component’s ancestors.

As an example, in the diagram below, Angular handles an event in LoginComponent which uses OnPush. Angular will invoke change detection in the entire component subtree including MainComponent ( LoginComponent ’s parent), even though MainComponent has OnPush as well. Angular checks MainComponent as well because LoginComponent is part of its view.

New inputs to component with OnPush link

Angular will run change detection within a child component with OnPush setting an input property as result of a template binding.

For example, in the diagram below, AppComponent passes a new input to MainComponent , which has OnPush . Angular will run change detection in MainComponent but will not run change detection in LoginComponent , which also has OnPush , unless it receives new inputs as well.

Edge cases link

  • Modifying input properties in TypeScript code . When you use an API like @ViewChild or @ContentChild to get a reference to a component in TypeScript and manually modify an @Input property, Angular will not automatically run change detection for OnPush components. If you need Angular to run change detection, you can inject ChangeDetectorRef in your component and call changeDetectorRef.markForCheck() to tell Angular to schedule a change detection.
  • Modifying object references . In case an input receives a mutable object as value and you modify the object but preserve the reference, Angular will not invoke change detection. That’s the expected behavior because the previous and the current value of the input point to the same reference.
Last reviewed on Wed May 04 2022
Read article
Angular - Slow computations

Slow computations link

On every change detection cycle, Angular synchronously:

  • Evaluates all template expressions in all components, unless specified otherwise, based on that each component's detection strategy
  • Executes the ngDoCheck , ngAfterContentChecked , ngAfterViewChecked , and ngOnChanges lifecycle hooks. A single slow computation within a template or a lifecycle hook can slow down the entire change detection process because Angular runs the computations sequentially.

Identifying slow computations link

You can identify heavy computations with Angular DevTools’ profiler. In the performance timeline, click a bar to preview a particular change detection cycle. This displays a bar chart, which shows how long the framework spent in change detection for each component. When you click a component, you can preview how long Angular spent evaluating its template and lifecycle hooks.

For example, in the preceding screenshot, the second recorded change detection cycle is selected. Angular spent over 573 ms on this cycle, with the most time spent in the EmployeeListComponent . In the details panel, you can see that Angular spent over 297 ms evaluating the template of the EmployeeListComponent .

Optimizing slow computations link

Here are several techniques to remove slow computations:

  • Optimizing the underlying algorithm . This is the recommended approach. If you can speed up the algorithm that is causing the problem, you can speed up the entire change detection mechanism.
  • Caching using pure pipes . You can move the heavy computation to a pure pipe. Angular reevaluates a pure pipe only if it detects that its inputs have changed, compared to the previous time Angular called it.
  • Using memoization . Memoization is a similar technique to pure pipes, with the difference that pure pipes preserve only the last result from the computation where memoization could store multiple results.
  • Avoid repaints/reflows in lifecycle hooks . Certain operations cause the browser to either synchronously recalculate the layout of the page or re-render it. Since reflows and repaints are generally slow, you want to avoid performing them in every change detection cycle.

Pure pipes and memoization have different trade-offs. Pure pipes are an Angular built-in concept compared to memoization, which is a general software engineering practice for caching function results. The memory overhead of memoization could be significant if you invoke the heavy computation frequently with different arguments.

Last reviewed on Wed May 04 2022
Read article
Angular - Resolving zone pollution

Resolving zone pollution link

Zone.js is a signaling mechanism that Angular uses to detect when an application state might have changed. It captures asynchronous operations like setTimeout , network requests, and event listeners. Angular schedules change detection based on signals from Zone.js

In some cases scheduled tasks or microtasks don’t make any changes in the data model, which makes running change detection unnecessary. Common examples are:

  • requestAnimationFrame , setTimeout or setInterval
  • Task or microtask scheduling by third-party libraries

This section covers how to identify such conditions, and how to run code outside the Angular zone to avoid unnecessary change detection calls.

Identifying unnecessary change detection calls link

You can detect unnecessary change detection calls using Angular DevTools. Often they appear as consecutive bars in the profiler’s timeline with source setTimeout , setInterval , requestAnimationFrame , or an event handler. When you have limited calls within your application of these APIs, the change detection invocation is usually caused by a third-party library.

In the image above, there is a series of change detection calls triggered by event handlers associated with an element. That’s a common challenge when using third-party, non-native Angular components, which do not alter the default behavior of NgZone .

Run tasks outside NgZone link

In such cases, you can instruct Angular to avoid calling change detection for tasks scheduled by a given piece of code using NgZone.

      
      import { Component, NgZone, OnInit } from '@angular/core';
@Component(...)
class AppComponent implements OnInit {
  constructor(private ngZone: NgZone) {}
  ngOnInit() {
    this.ngZone.runOutsideAngular(() => setInterval(pollForUpdates), 500);
  }
}
    

The preceding snippet instructs Angular to call setInterval outside the Angular Zone and skip running change detection after pollForUpdates runs.

Third-party libraries commonly trigger unnecessary change detection cycles because they weren't authored with Zone.js in mind. Avoid these extra cycles by calling library APIs outside the Angular zone:

      
      import { Component, NgZone, OnInit } from '@angular/core';
import * as Plotly from 'plotly.js-dist-min';

@Component(...)
class AppComponent implements OnInit {
  constructor(private ngZone: NgZone) {}
  ngOnInit() {
    this.ngZone.runOutsideAngular(() => {
      Plotly.newPlot('chart', data);
    });
  }
}
    

Running Plotly.newPlot('chart', data); within runOutsideAngular instructs the framework that it shouldn’t run change detection after the execution of tasks scheduled by the initialization logic.

For example, if Plotly.newPlot('chart', data) adds event listeners to a DOM element, Angular does not run change detection after the execution of their handlers.

Last reviewed on Wed May 04 2022
Read article
Angular - Angular change detection and runtime optimization

Angular change detection and runtime optimization link

Change detection is the process through which Angular checks to see whether your application state has changed, and if any DOM needs to be updated. At a high level, Angular walks your components from top to bottom, looking for changes. Angular runs its change detection mechanism periodically so that changes to the data model are reflected in an application’s view. Change detection can be triggered either manually or through an asynchronous event (for example, a user interaction or an XMLHttpRequest completion).

Change detection is a highly optimized performant, but it can still cause slowdowns if the application runs it too frequently.

In this guide, you’ll learn how to control and optimize the change detection mechanism by skipping parts of your application and running change detection only when necessary.

Watch this video if you prefer to learn more about performance optimizations in a media format:

Last reviewed on Wed May 04 2022
Read article