LUN created using SDU is reported as misaligned when used with Oracle databases

KB at your finger tips

This is one stop global knowledge base where you can learn about all the products, solutions and support features.

Products-NetApp

LUN created using SDU is reported as misaligned when used with Oracle databases

Applies to

SnapDrive for windows
Snap Manager for Oracle (SMO)

Issue

From the NetApp storage system console, the lun show –v command reports the LUN to be misaligned:

netappstorage> lun show -v

/vol/orabackup_precg1asdl01/orabackup/orabackup_precg1asdl01_new.lun

/vol/orabackup_precg1asdl01/orabackup/orabackup_precg1asdl01_new

.lun 400.0g (429523992576) (r/w, online, mapped)

Serial#: HndnCZmKv33k

Share: none

Space Reservation: disabled

Multiprotocol Type: linux

Maps: precg1asdl01=0

Occupied Size: 6.5g (6926499840)

Creation Time: Mon Sep 10 14:25:43 MDT 2012

Alignment: misaligned

Cluster Shared Volume Information: 0x0

LUN created with the correct OS type setting (Linux) uses the fdisk -u –l /dev/sdxx command from the UNIX host to get this information.

Example output :

Disk /dev/sdbh: 429.5 GB, 429523992576 bytes

255 heads, 63 sectors/track, 52219 cylinders, total 838914048 sectors

Units = sectors of 1 * 512 = 512 bytes

Device Boot Start End Blocks Id System

/dev/sdbh1 8 838898234 419449113+ 83 Linux

Cause

Solution

Stay Ahead in Today’s Competitive Market!
Unlock your company’s full potential with a Virtual Delivery Center (VDC). Gain specialized expertise, drive seamless operations, and scale effortlessly for long-term success.

Book A Meeting To Setup A VDC

MetroCluster Check commands shows warnings while system is in switchover state

Applies to

ONTAP 9.1 and earlier

Issue

When running the metrocluster check command while in the switchover state, some checks return warnings:

ClusterA::> metrocluster check show Last Checked On: 4/21/2016 07:34:32 Component Result ------------------- --------- nodes warning lifs ok config-replication warning aggregates ok clusters ok 5 entries were displayed. ClusterA::> metrocluster check node show Last Checked On: 4/21/2016 07:34:32 Node Check Result --------------------- ------------------------------------ --------- ClusterA-01 node-reachable ok metrocluster-ready ok local-ha-partner ok ha-mirroring-on ok ha-mirroring-op-state ok symmetric-ha-relationship ok remote-dr-partner ok dr-mirroring-on warning dr-mirroring-op-state warning symmetric-dr-relationship ok remote-dr-auxiliary-partner ok symmetric-dr-auxiliary-relationship ok storage-failover-enabled ok has-intercluster-lif ok node-object-limit ok automatic-uso not-applicable ClusterA::> metrocluster check config-replication show -instance Enabled: true Running: true Recovery Steps: - Remote Heartbeat: ok Last Heartbeat Sent: 4/21/2016 08:20:32 Last Heartbeat Received: 4/21/2016 08:19:57 Recovery Steps: - Storage Status: ok Storage In Use: Cluster-wide Volume: MDV_CRS_1fa20d6af0df11e5942100a0985bb98a_A Storage Remarks: - Recovery Steps: - Vserver Streams: warning Recovery Steps: Run the "metrocluster vserver show" command for more details. Cluster Streams: warning Recovery Steps: Contact technical support for assistance.

Read article

Aggregate creation fails in a MetroCluster with error: An aggregate already uses aggr0 as name

Applies to

ONTAP 9
MetroCluster

Issue

Aggregate creation fails with error
Error: command failed: An aggregate already uses <duplicate aggr name> as name

Read article

How to create unique aggregate names in a MetroCluster

Applies to

MetroCluster
ONTAP 9

Description

This Article describes how to create unique aggregate names if accidently duplicate aggregate names got created.

Procedure

Read article

Is Dynamic POD Licensing supported in Fabric MetroCluster or Brocade switches

Applies to

MetroCluster
ONTAP 9
Brocade

Question(s) and Answer(s)

Is Dynamic POD Licensing supported in Fabric MetroCluster for Brocade switches?

Dynamic Licensing is supported in MetroCluster starting Ontap 9
Dynamic Licensing is not supported in 7mode MetroCluster

Is Dynamic POD Licensing supported in Fabric MetroCluster for Brocade switches?

Dynamic Licensing is supported in MetroCluster starting Ontap 9
Dynamic Licensing is not supported in 7mode MetroCluster

Read article

Should nodes in a MetroCluster DR Group be of the same controller type?

Applies to

MetroCluster
ONTAP 9

Question(s) and Answer(s)

Should nodes in a MetroCluster DR Group be of the same controller type?

In Data ONTAP, the controller forming a High Availability (HA) pair or a MetroCluster has to be of the same type.
If the system consists of different types, contact your NetApp Sales Representative to resolve the issue.

Should nodes in a MetroCluster DR Group be of the same controller type?

Read article

Welcome to Knowledge Base!

KB at your finger tips

Products-NetApp