SAP S/4HANA private cloud edition

KB at your finger tips

This is one stop global knowledge base where you can learn about all the products, solutions and support features.

Available Monitoring Content

The following monitoring content is available for SAP S/4HANA Private Cloud Edition

Category	Type	Description
AIF Messages	Messages	Messages send via the Application Interface Framework
IDoc	Messages	IDocs sent or received by the SAP S/4HANA system
Web Service Messages	Messages	Messages sent or received via Web Services and Web Service Proxies
Concur Objects	Messages	Monitors messages sent for the integration with Concur
ABAP Web Service Provider	Exceptions	Web service errors for incoming web service calls (available with ST-PI 7.40 SP16)
ABAP Runtime	Exceptions	ABAP runtime errors (available with ST-PI 7.40 SP16)
ABAP Update	Exceptions	ABAP update errors (available with ST-PI 7.40 SP16)
ABAP Gateway Errors	Exceptions	Exceptions in the ABAP Gateway (available with ST-PI 7.40 SP16)
ABAP Aborted Job	Exceptions	ABAP aborted jobs (available with ST-PI 7.40 SP16)
ABAP System Log	Exceptions	ABAP system log errors (available with ST-PI 7.40 SP16)
SAP S/4HANA Cloud Data Replication	Exceptions	Collects exceptions in the Data Replication Framework (DRF)
ABAP Web Service Consumer	Exceptions	Web service errors for outgoing web service calls (available with ST-PI 7.40 SP16)
SAP S/4HANA Cloud Asset Central Foundation Integration	Exceptions	Collects exceptions happening in SAP Intelligent Asset Management

Connect SAP S/4HANA private cloud edition

To perform the necessary setup steps in the SAP S/4HANA private cloud edition, please refer to:

Setup SAP S/4HANA private cloud edition

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP S/4HANA private cloud edition.

Please note:

If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

AIF Messages

Available Events

Erroneous Message(AIF) Detected(Single): The event is created for each failed message.
Erroneous Messages(AIF) Detected(Grouped): The event is created if one or more messages failed since the last data collection.

Available Filters

AIF Sub-category	Filters for Data Collection	Filters for Events
All sub-categories	Status Status Group	Direction Namespace Interface Name Version Status Status Group Status Text
bgRFC(queue)		Queue Name RFC Destination
bgRFC(trans)		RFC Destination Transaction Code Program User
IDOC		Sender port Receiver port Message type
Odata Client Proxy		no additional filters
XI-runtime		Sender namespace Sender interface Sender party Sender component Receiver namespace Receiver interface Receiver party Receiver component
qRFC		Queue Name RFC Destination
tRFC		RFC Destination Function Module User
WS-runtime		Adapter Type Sender Party Sender Interface Name Receiver Party Receiver Interface Name
XML		no additional filters
Sync Log		no additional filters

Concur Objects

Available Events

Erroneous Concur Object Detected(Single): The event is created for each failed message.
Erroneous Concur Objects Detected(Grouped): The event is created if one or more messages failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Concur Company ID Connection Name Direction Object Type SAP Logical System ID SAP System Type Status Status Group

IDoc

Available Events

Erroneous Message(IDOC) Detected(Single): The event is created for each failed IDoc.
Erroneous Messages(IDOC) Detected(Grouped): The event is created if one or more IDocs failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Message Type Status Status Group	Basic Type Direction Message Function Message Type Message Variant Receiver Address Receiver Partner Function Receiver Partner Number Receiver Partner Type Receiver Port Sender Address Sender Partner Function Sender Partner Number Sender Partner Type Sender Port Status Status Group Status Text

Setup Collection for Additional Payload Attributes

You can collect payload data from IDocs. This data will be available in the message details on the tab "Message Data".

To find the segment field name:
1. Log on to the managed ABAP backend system
2. Go to transaction WE05
3. Enter the search parameters to find one IDoc message for the IDocs you are interested in
4. Double-click on the IDoc to open it
5. Expand 'Data Records'
6. Select the segment that you are interested in
7. You find the segment fields on the screen "Content of Selected Segment"
To set up the data collection of payload attributes click on the > button at the end of the line for the category IDoc
In the area "Collect Additional Attributes"
1. Click the "Add" button to add the payload attribute
2. Enter the filter value:
  1. Message Type
  2. Segment Name
  3. Field Name
3. Click "OK"
Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

Web Service Messages

Prerequisites

The Minimum System Requirements to monitor SXMB_MONI for Web Services is SAP BASIS 7.02 SP08

Available Events

Erroneous Message(WS) Detected(Single): The event is created for each failed web service message.
Erroneous Messages(WS) Detected(Grouped): The event is created if one or more web service messages failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Adapter Type Direction Message State Processing Status Group Processing Status Group Text Receiver Interface Name Receiver Interface Namespace Receiver Interface Operation Receiver Party Sender Interface Name Sender Interface Namespace Sender Interface Operation Sender Party Status Status Group Status Text

Setup Collection for Additional Payload Attributes

You can collect payload data from Web Service messages. This data will be available in the message details on the tab "Message Data".

Find the payload attribute name:
1. Log on to the managed ABAP backend system
2. Go to transaction SRT_MONI
3. Enter the search parameters to find one web service message for the web service you are interested in
4. Double-click on the web service message to open it
5. Select 'Message Body'
6. Click the button 'Original XML' to open the formatted XML message
7. Find the attribute you are interested in
8. Note down the XML tag name
To set up the data collection of payload attributes click on the > button at the end of the line for the category "Web Service Messages"
In the area "Collect Additional Attributes"
1. Click the "Add" button to add the payload attribute
2. Enter the filter value:
  1. Attribute: The XML tag name on the attribute
3. Click "OK"
Click the "Save" button

You can search for the messages that contain the collected data in the Tracking application. Please enclose the value with '*' to successfully find the messages (e.g. *00123456*).

ABAP Aborted Job

Available Events

Erroneous ABAP Aborted Job: The event is created for aborted ABAP jobs.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Job Name User

ABAP Gateway Errors

Available Events

Erroneous ABAP Gateway Errors: The event is created for ABAP gateway exceptions.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Service Name User Host Message Location Message Id

ABAP Runtime

Available Events

Erroneous ABAP Runtime: The event is created for ABAP runtime errors.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Runtime Error~Exception Program User Message

ABAP System Log

Available Events

Erroneous ABAP System Log: The event is created for exceptions in the ABAP System Log.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Message Id Program User Status

ABAP Update

Available Events

Erroneous ABAP Update: The event is created for ABAP Update errors.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	User Transaction

ABAP Web Service Consumer

Available Events

Erroneous ABAP Web Service Consumer: The event is created for errors in the web service log for ABAP Web Service Consumers.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Message Proxy Name User

ABAP Web Service Provider

Available Events

Erroneous ABAP Web Service Provider: The event is created for errors in the web service log for ABAP Web Service Providers.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Coming soon.	Message WS Name (Proxy) User

SAP S/4HANA Cloud Asset Central Foundation Integration

Available Events

Erroneous SAP S/4HANA Cloud Asset Central Foundation Integration: The event is created for exceptions in SAP S/4HANA Cloud Asset Central Foundation Integration.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Predefined (not changeable) Object: /SYCLO/ Subobject: /SYCLO/INB_TRANS	External ID Message ID Message Number Text Program Transaction User

Filters for Data Collection

Filters for Events (planned)

Predefined (not changeable)

Object: /SYCLO/
Subobject: /SYCLO/INB_TRANS

External ID
Message ID
Message Number
Text
Program
Transaction
User

SAP S/4HANA Cloud Data Replication

Available Events

Erroneous SAP S/4HANA Cloud Data Replication: The event is created for exceptions in SAP S/4HANA Cloud Data Replication.

Available Filters

Filters for Data Collection	Filters for Events (planned)
Predefined (not changeable) Object: DRF_OUTBOUND Subobject: *	Subobject External ID Message ID Message Number Text Program Transaction User

Filters for Data Collection

Filters for Events (planned)

Predefined (not changeable)

Object: DRF_OUTBOUND
Subobject: *

Subobject
External ID
Message ID
Message Number
Text
Program
Transaction
User

SAP Field Service Management

Available Monitoring Content

Category	Type	Description
SAP Field Service Management Transactions	Messages	Messages send from and to SAP Field Service Management

Connect SAP Sales & Services Cloud

To perform the necessary setup steps in the SAP Field Service Management, please refer to:

Setup SAP Field Service Management

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Field Service Management.

Please note:

If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

SAP Field Service Management Transactions

Available Events

Erroneous SAP Field Service Management Message Detected(Single): The event is created for each failed message in the managed service.
Erroneous SAP Field Service Management Message Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Company ID Direction Status Status Group Status Text

Read article

SAP Ariba

This page covers the setup of Integration & Exception Monitoring with SAP Cloud ALM for the following SAP Ariba Products:

SAP Ariba Sourcing
SAP Ariba Procurement
SAP Ariba Network
SAP Ariba Cloud Integration Gateway (CIG)

Available Monitoring Content

Category	Type	Description	Supported Processes
SAP Ariba Cloud Integration Gateway Transactions	Messages	Messages send via SAP Ariba Cloud Integration Gateway	Integration
SAP Ariba Network Messages	Messages	Messages send via SAP Ariba Network	Setting Up Automation of Order-to-Invoice with Ariba Network (4A1) Setting Up Automation of Source-to-Pay with Ariba Network (42K)
SAP Ariba Procurement Integration Messages	Messages	Messages send from and to SAP Ariba Procurement	Setting Up Guided Buying Capability with SAP Ariba Buying (2NV) Setting Up Guided Buying for Central Procurement with SAP Ariba Buying (3EN)
SAP Ariba Sourcing Integration Messages	Messages	Messages send from and to SAP Ariba Sourcing	Setting Up Contract Management with SAP Ariba Contracts (4AZ) Setting Up Contract for Central Procurement with SAP Ariba Contracts (4B0) Setting Up Sourcing with SAP Ariba Sourcing (4BL) Setting Up Central Procurement with SAP Ariba Sourcing (4QN)

Connect SAP Ariba

To perform the necessary setup steps in the SAP Ariba, please refer to:

Setup SAP Ariba

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Ariba.

Please note:

If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

SAP Ariba Cloud Integration Gateway Transactions

Available Events

Erroneous SAP Ariba Cloud Integration Gateway Transaction Detected (Single): The event is created for each failed transaction in the managed service.
Erroneous SAP Ariba Cloud Integration Gateway Transaction Detected (Grouped): The event is created if one or more transactions in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Application Name Component Name Direction Document Type Receiver ID Receiver Name Sender ID Sender Name Status Status Group Status Text

SAP Ariba Network Messages

Available Events

Erroneous SAP Ariba Network Message Detected(Single): The event is created for each failed message in the managed service.
Erroneous SAP Ariba Network Message Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Component Name Direction Document Type Event Name Receiver Name Receiver Network ID Sender Name Sender Network ID Status Status Group Status Text

SAP Ariba Procurement Integration Messages

Available Events

Erroneous SAP Ariba Procurement Integration Message Detected(Single): The event is created for each failed message in the managed service.
Erroneous SAP Ariba Procurement Integration Message Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Component Name Direction Event Name Status Status Group Status Text

SAP Ariba Sourcing Integration Messages

Available Events

Erroneous SAP Ariba Sourcing Integration Message Detected(Single): The event is created for each failed message in the managed service.
Erroneous SAP Ariba Sourcing Integration Message Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Company Code Id Component Name Direction Event Name Integration Channel Purchase Group Id Purchase Organization Id Realm Status Status Group Status Text System Id

Further Information

Supported Events

Product	Process	Events
SAP Ariba Sourcing / SAP Ariba Contracts	Setting Up Contract Management with SAP Ariba Contracts (4AZ)	PurchaseContractRequestExport [Outbound] PurchaseContractStatusUpdateRequestImport [Inbound]
SAP Ariba Sourcing / SAP Ariba Contracts	Setting Up Contract for Central Procurement with SAP Ariba Contracts (4B0)	PurchaseContractRequestExport [Outbound] PurchaseContractStatusUpdateRequestImport [Inbound]
SAP Ariba Sourcing / SAP Ariba Contracts	Setting Up Sourcing with SAP Ariba Sourcing (4BL)	S4HANARequestForQuotation [Inbound] RFQConfirmationS4Request [Outbound] SupplierQuotationS4RequestAsync [Outbound] S4HanaQuotationConfirmation [Inbound]
SAP Ariba Sourcing / SAP Ariba Contracts	Setting Up Central Procurement with SAP Ariba Sourcing (4QN)	S4HANARequestForQuotation [Inbound] RFQConfirmationS4Request [Outbound] SupplierQuotationS4RequestAsync [Outbound] S4HanaQuotationConfirmation [Inbound]
SAP Ariba Procurement / SAP Ariba Guided Buying	Setting Up Guided Buying Capability with SAP Ariba Buying (2NV)	RequisitionSubmit [Outbound] RequisitionFinalApproval [Outbound] RequisitionLineAddAttachment [Outbound] RequisitionLineRemoveAttachment [Outbound] RequisitionDelete [Outbound] PurchaseOrderStatusNotificationMsgS4Hana [Inbound] PurchaseRequisitionReplicationNotificationS4Hana [Inbound]
SAP Ariba Procurement / SAP Ariba Guided Buying	Setting Up Guided Buying for Central Procurement with SAP Ariba Buying (3EN)	RequisitionSubmit [Outbound] RequisitionFinalApproval [Outbound] RequisitionLineAddAttachment [Outbound] RequisitionLineRemoveAttachment [Outbound] RequisitionDelete [Outbound] PurchaseOrderStatusNotificationMsgS4Hana [Inbound] PurchaseRequisitionReplicationNotificationS4Hana [Inbound]
Ariba Network	Setting Up Automation of Order-to-Invoice with Ariba Network (4A1) Setting Up Automation of Source-to-Pay with Ariba Network (42K)	ProcessOrderRequest ProcessShipNoticeRequest ProcessConfirmationRequest ProcessReceiptRequest ProcessInvoiceDetailRequest ProcessStatusUpdateRequest ProcessPaymentProposalRequest ProcessServiceEntrySheet ProcessStatusUpdateRequest ProcessQuoteRequest (AN Discovery) ProcessQuoteMessageOrder (AN Discovery)
SAP Ariba Cloud Integration Gateway	Integration	Status log for transmitted documents (document types see supported processes for SAP Ariba products)

Read article

SAP SuccessFactors SFAPI User

To collect data from SAP SuccessFactors for Business Process Monitoring or Exception Monitoring an endpoint needs to be created in SAP Cloud ALM.

To create this endpoint a user is needed in SAP SuccessFactors. It is recommended to create a dedicated user in SAP SuccessFactors (e.g. SFAPI) for this purpose instead of using a personal or an admin user.

Required User Settings

Disable Password Expiration

To avoid that the password for the user expires, please create a login exception for the SFAPI user.

Go to Admin Center → Password & Login Policy Settings
Click on "Set API Login Exceptions"
1. Click the "Add" button
2. Enter the username of the SFAPI user
3. Set the parameter 'Maximum password age(days)' = -1
4. Enter the IP address of your SAP Cloud ALM tenant.
  1. You can look for the IP range of your SAP Cloud ALM tenant here.
  2. You can also enter the range 1.1.1.1-255.255.255.255 to cover any possible IP address.

For more information refer to SAP note 2161909 - How to enable SFAPI in SuccessFactors

Required User Permissions

To assign the required permissions to the SFAPI user please first create a new permission group and add your SFAPI user to the group:

Go to Admin Center → Manage Permission Groups
Create a new permission group using the "Create New..." button
Enter a group name (e.g. SFAPI_CALM_USERS)
Under "Choose Group Members" → "People Pool" choose "Username"
1. Search for your SFAPI user and add it by clicking the check box in front of it
2. Click Done
Click Done

Then create a new permission role:

Go to Admin Center → Manage Permission Roles
Create a new permission role using the "Create New..." button
Enter a role name (e.g. SFAPI_CALM)
Under "Permission Settings" click the "Permission..." button
1. Add the permission as described below depending on the use cases you want to use in SAP Cloud ALM
Under "Grant this role to..." click the "Add..." button
1. Select "Grant role to: Permission Group"
2. Click the "Select..." button
3. Search for your SFAPI permission group and check the box in front of it
4. Click Done
Save your new permission role

General Permissions

The following permissions need to be assigned to the SFAPI user independent of the use case it will be used for:

User Permissions
- General User Permission
  - User Login
  - SFAPI User Login
- Payroll Integration Permission
  - Data Replication Proxy (View, Edit)
  - Trigger Data Replication Proxy Status Reset (View, Edit)
Administrator Permissions
- Manage Integration Tools
  - Allow Admin to Access OData API through Basic Authentication
- Employee Central API
  - Employee Central Foundation OData API (editable)
  - Employee Central HRIS OData API (editable)
- Metadata Framework
  - Admin access to MDF OData API

Permissions for Integration & Exception Monitoring

The following permissions are required for the Integration & Exception Monitoring user case:

Administrator Permissions
- Manage Integration Tools
  - Access to Integration Center
  - Access to Data Replication Monitor
- Admin Center Permissions
  - Read Execution Manager Events
  - Read Execution Manager Event Payload or Event Report
  - Monitor Scheduled Jobs

Permissions for Business Process Monitoring

The following permissions are required for the Business Process Monitoring user case:

Administrator Permissions
- Manage Recruiting
  - Detailed Requisition Reporting Privileges
  - Manage Recruiting Templates
- Manage Integration Tools
  - Access to OData API Metadata Refresh and Export
  - Access to OData API Data Dictionary
User Permissions
- Recruiting Permissions
  - OData API Application Export
  - OData API Candidate Export
  - OData API Job Requisition Export
  - OData API Application Audit Export
  - OData API Job Offer Export
  - OData API Offer Letter Export

View permissions for the following MDF objects:

Administrator Permissions
- Manage MDF Recruiting Objects
  - Candidate Relationship Management Status Set
  - Campaign Limits
  - EmailBrandTemplate
  - MarketingBrand
  - Recruiting Rules Assignment Configuration
  - Candidate Relationship Management Status Map
  - Recruiting User Personalization Object Configuration.fields (Recruiting User Personalization Field Configuration)
  - Candidate Relationship Management Status
  - Pool Limits
  - Recruiting User Personalization Object Configuration
User Permissions
- MDF Recruiting Permissions
  - Campaign
  - CampaignContent
  - CandidateActivity
  - Pool
  - Pool Member
  - Share Pool with User
  - Recruiting Sensitive Personal Data Field List.spdFieldList (RCMSPDField)
  - Recruiting Sensitive Personal Data Field List
  - Candidate Follow
  - CampaignRecipient
  - CampaignPool
  - Share Pool with Group

Read article

SAP Order Management foundation

Available Monitoring Content

The following monitoring content is available for SAP Order Management foundation

Category	Type	Description
SAP Order Management foundation Messages	Messages	Monitors messages for incoming orders and order dispatches in SAP Order Management foundation

Connect SAP Order Management foundation

To perform the necessary setup steps in the SAP Order Management foundation, please refer to:

Setup SAP Order Management foundation

Setup Integration & Exception Monitoring

To learn how to configure the monitoring, follow the documentation on the page Integration & Exception Monitoring - Setup & Configuration.

Below you find category-specific information for the monitoring categories available for SAP Order Management Foundation.

Please note:

If an input help is available for the filter parameters, this input help is filled based on the messages and exceptions collected in SAP Cloud ALM so far.
If no filter is set up for the data collection, all messages or exceptions will be collected for the category.

SAP Order Management foundation Messages

Available Events

Erroneous SAP Order Management foundation Message Detected(Single): The event is created for each failed message in the managed service.
Erroneous SAP Order Management foundation Message Detected(Grouped): The event is created if one or more messages in the managed service failed since the last data collection.

Available Filters

Filters for Data Collection	Filters for Events
Status Status Group	Component Direction Status Status Group Status Text

Read article

Integration & Exception Monitoring - Videos

How to Set Up Integration & Exception Monitoring

SAP Ariba

Set Up Integration & Exception Monitoring for SAP Ariba

Prerequisites for this video:
- You need a user with access to SAP Ariba Connect (https://support.ariba.com)

SAP Field Service Management

Set Up Integration & Exception Monitoring for SAP Field Service Management

Prerequisites for this video:
- You need a user with account-level administrator authorizations
- Log on to your SAP Field Service Management account with the option "Sign In with Account"

SAP Fieldglass

Set Up Integration & Exception Monitoring for SAP Fieldglass

Prerequisites for this video:
- You need a user with Fieldglass Configuration Manager access
- Create a user in SAP Fieldglass to be used in the web service created for the API application key

SAP Integration Suite Cloud Integration

Collect Setup Information

The video explains how to check your SAP Integration Suite Cloud Integration platform and the identity provider to choose the correct follow up video

Set Up Application Monitoring for SAP Integration Suite Cloud Integration running in Cloud Foundry

Prerequisites for this video:
- You need a sub-account member with "Space Developer" authorizations for the space in the SAP Integration Suite Cloud Integration sub-account in SAP BTP Cockpit
- You need a user with the role "Integration Monitoring Integration Architect" in SAP Cloud ALM

Set Up Application Monitoring for SAP Integration Suite Cloud Integration running in Neo

Prerequisites for this video:
- You need a sub-account member with "Administrator" access for the SAP Integration Suite Cloud Integration sub-account in SAP BTP Cockpit
- You need a user with the role "Integration Monitoring Integration Architect" in SAP Cloud ALM

SAP S/4HANA, SAP Business Suite, SAP Employee Central Payroll

Set Up Monitoring for SAP S/4 HANA, SAP Business Suite or SAP Employee Central Payroll

Prerequisites for this video:
- Download SAP Cloud ALM service key
- Find prerequisites in the ABAP system here

SAP S/4HANA Cloud, SAP Marketing Cloud

Set Up Application Monitoring for SAP S/4HANA Cloud and SAP Marketing Cloud

Prerequisites for this video:
- Download SAP Cloud ALM service key
- You need a user with the role SAP_BR_ADMINISTRATOR in the SAP Marketing Cloud tenant.

SAP Sales & Services Cloud

Set Up Monitoring for SAP Sales & Services Cloud

Prerequisites for this video:
- You need a user with administrator authorizations in the SAP Sales & Services Cloud tenant

SAP SuccessFactors

Set Up Integration & Exception Monitoring for SAP SuccessFactors

Prerequisites for this video:
- Download the SAP Cloud ALM service key
- Create an SFAPI user in SAP SuccessFactors as described here
- Your user in SAP SuccessFactors needs needs "Access to Integration Service Registration Center UI" permissions
- You need a user with the role "Integration Monitoring Integration Architect" in SAP Cloud ALM

How to Configure Integration & Exception Monitoring

How to Configure Integration & Exception Monitoring for a Specific Cloud Service

This video explains the general setup of Integration and Exceptions Monitoring.

For information how to connect the different service types, please choose the respective video above.

How to Create and Monitor a Scenario in Integration & Exception Monitoring

This video describes how to create a monitoring scenario in Integration & Exception Monitoring.

How to Use Integration & Exception Monitoring

How to Use Integration & Exception Monitoring for Travel to Reimburse (Cloud)

How to Use Integration & Exception Monitoring for SAP Integration Suite

Read article

Welcome to Knowledge Base!

KB at your finger tips